Fixed assets can be created within the organization or purchased. The examples of fixed assets are equipment, furniture and fixtures, machinery for your business. Generally, fixed assets are assets whose useful life exceeds one year.
As a fixed asset is in use, its value will decline over time. Depreciation is the process of allocating an asset's cost over the course of its useful life. Notice that generally most of tangible assets are depreciated except for land that is never depreciated. Some of the intangible assets are not depreciated because they may have unlimited useful lives with their values not declining over time.
FirstBit ERP provides the functionality that allows you to account for the fixed assets from their purchase or construction to disposal.
Setting up the functionality
To enable the Asset Management module and the fixed asset accounting functionality, select the Enable Fixed Asset Accounting option on the Administration > Settings > Asset Management form.
If you need to use non-current asset classes, select the Enable Non-Current Asset Classes option on the same form.
To be able to calculate depreciation of fixed assets, select the Enable Depreciation of Fixed Assets option.
If you are going to use the Preparation for Fixed Asset Sale or Conservation of Fixed Assets documents and the corresponding functionality of fixed asset accounting, select the Enable Preparation for Fixed Asset Sale and Enable Conservation of Fixed Assets options, respectively.
If your organization is able to create fixed assets and needs to track construction costs, select the Enable Construction in Progress for Fixed Assets option.
If you select the Enable Capital Improvements to Fixed Assets option, the corresponding functionality will allow you to register any costs incurred while improvements are made to specific fixed assets and to revise accordingly their useful lives and gross costs.
For details, refer to Settings: Asset Management.
Fixed Asset Life Cycle and Statuses
Each fixed asset goes through several stages during its life: planning, acquiring, using, maintaining, and disposal. The statuses correspond the stages of fixed asset lifecycle. Some statuses are changed automatically on posting of specific documents, while other statuses can be changed manually.
Different documents are used to register different stages of fixed asset life cycle.
Brief descriptions of handling different stages are contained in the sections below.
Planning Stage
Planning for new assets is the first stage of their life cycle. Asset managers need to identify particular business needs, budget restrictions, and perform market research. At this stage, it can be decided whether it is worth constructing or manufacturing the asset by the entity's own means.
Acquiring Stage
You can acquire a new fixed asset by purchasing or constructing.
At this stage, you can create a master record for the fixed asset, for this go to: Asset Management > Master Data > Fixed Assets. Specify a unique identifier/ code, fixed asset type, and class of the asset. For more information, refer to Adding a Fixed Asset.
By default, the fixed asset gets the New status.
If you purchased fixed assets, you can register it as the purchase of new inventory items by creating an Invoice Received. You may need to create corresponding master records for these inventory items.
Deployment of some assets may involve delivery, assembling of the items, and training of the personnel. The costs of these services can be recorded using the Purchasing > Purchasing Documents > Additional Expenses documents.
If it is planned that the asset will be constructed, you can manually change the New status of the fixed asset to Construction in Progress. Costs of any materials and construction works must be recorded to Construction in Progress GL account. Once the fixed asset is ready to use, you can manually change the status to Construction is Completed.
Usage Stage
Once the fixed asset is ready for use, and have the Construction is Completed or New status, you can accept it for accounting and start depreciation.
To add a new fixed asset to accounting, go to: Asset Management > Fixed Asset Documents > Fixed Asset Entries. In this document, for the specified fixed asset, you can list the inventory items that will be used as the fixed asset or specify only the construction costs if the fixed asset was constructed.
A fixed asset may be composed of multiple inventory items. You can create one fixed asset for specific quantity of the inventory item, or you can create a separate fixed asset for each unit of the specified quantity of the item. For example, a fixed asset Conference Room Chairs may include multiple chairs used in a conference room. Alternatively, you can consider each chair as a separate fixed asset. Also, you can associate multiple items of different types with a single fixed asset. For example, a warehouse fixture may include multiple racks and shelves purchased separately.
Note. Accounting for the fixed assets is performed in the accounting currency.
For the fixed asset, you need to specify the following parameters:
- Initial Cost: the total of all costs and additional expenses incurred when purchasing the items, transporting it to the premises, assembling, and adjusting.
- Salvage Value: the residual cost of the asset after usage.
To start depreciation calculation, you must select one of the supported depreciation methods:
- Straight Line and specify the Useful Life of the asset in months.
- Units of Production and specify the Estimated Production Volume.
Then, select the Depreciate check box to start depreciation in the month next to the month when the fixed asset was accepted to accounting – this is the default option. If you choose to start depreciation in the same month in which the asset was accepted to accounting, select the Depreciate in the Current Month option. Depreciation process continues until the net book value of the asset reaches the salvage value.
For detailed information, refer to Creating a Fixed Asset Entry.
On posting the document, the status of the listed fixed asset changes to Active.
During usage, the fixed asset cost is depreciated according to the selected for this asset depreciation methods and parameters. For more information, refer to Overview of Depreciation of Fixed Assets.
Maintenance and Capital Improvements Stages
Generally, depreciation is continuous and reflects expected wear and tear to fixed assets.
Reassessment
Periodically, business re-assesses their fixed assets for impairment. Over time, an asset's book value may become lower than the current market value (CMV) at which the asset could be sold, for instance due to unexpected damages. In some cases, the CMV of a specific asset may become higher than the book value. This means that its value on the balance sheet must be adjusted accordingly. In some countries, an organization cannot selectively apply revaluation to individual fixed assets. Instead, it must be applied to entire asset classes.
To register the results of reassessment, you can use the Changes of Fixed Asset Parameters document. Here, you can enter the revised Gross Cost, Salvage Value, and Useful Life.
Conservations
Fixed assets may need some preventive maintenance works to prevent damage or emergency repair over their useful lives. If the works require idle time measured in financial periods, you can initiate conservation of the fixed assets. Also, it may happen that you won't need to use specific assets some time for some reasons.
To register the fixed assets placed into conservation, you can create Conservations of Fixed Assets documents with the Start of Conservation transaction type, that are located as follows: Asset Management > Fixed Asset Documents > Conservations of Fixed Assets.
The fixed assets in conservation will appear on the balance sheet, however, the depreciation will not be calculated. The status of the fixed asset changes from Active to In Conservation.
To indicate that the fixed asset is again in use, you can create a Conservation of Fixed Assets document with the Cancellation of Conservation transaction type. Posting of this document changes the status from In Conservation back to Active.
The fixed asset, once conservation is cancelled, will be depreciated. The duration of useful life is not changed; however, it is just divided into the interval before conservation and the interval after cancellation of this conservation. The depreciation calculation will be resumed. For more information, refer to Conservations of Fixed Assets.
Capital Improvements
If you decide to make capital improvements to a fixed asset, that is, to replace the significant parts with parts with higher efficiency characteristics or perform other essential works, necessity to place the asset in conservation may depend on how long the fixed asset will be out of use.
Generally, improvements could extend the useful life and increase the gross cost of the asset. You can record the costs of improvements using various documents - you only need to record these costs to the Capital Improvements GL account and associate them with particular fixed asset selected as cost object. Then, you can capitalize the costs of these improvements and register changes in other parameters by creating a Capital Improvements to Fixed Assets document. For details, refer to Capital Improvements to Fixed Assets.
Also, in this document you can calculate the current depreciation using the "old" parameters if needed. If the asset was in conservation during the capital improvement works, you will need to cancel the conservation once the works are completed. After that, you will be able to calculate depreciation with the revised parameters resulted from capital improvements made to the asset.
Disposal
Disposing of the fixed asset represents the final stage of the asset's life cycle in your organization. Disposal can be done by selling or writing off.
Disposal by Sale
Generally, when the asset net book value reaches the salvage value, the asset is sold for a salvage value which is the asset's estimated value if it were broken down and sold in parts.
However, some fixed assets can be sold for a higher price or earlier than at the planned end of their useful life. After some period of fixed asset usage, the organization may decide to sell the asset.
If you need to make specific preparations before you can sell the fixed assets, you create a Preparation for Fixed Asset Sale document which involves moving the fixed asset from the balance sheet to a specific GL account (by default, Held for Sale). On posting the document, the asset's status changes to Held for Sale, and depreciation is not calculated.
Sales of fixed assets are registered by creating the Fixed Asset Sales documents. For details, refer to Fixed Asset Sales. If you used Preparation for Fixed Asset Sale, then you will be able to generate a Fixed Asset Sale document based on the Preparation for Fixed Asset Sale document.
At the period of sales, the asset's net book value is the difference between the Gross Cost and accumulated depreciation.
Note. If the sale occurs before the end of the month, you can manually run the depreciation calculation for the current month by clicking the Calculate Depreciation button on the toolbar of the Fixed Asset Sale (create) form.
The Fixed Asset Sales document assigns the Disposed status to the asset. Any difference between the proceeds from sales and the fixes asset's net book value is recognized as either a gain or a loss.
Disposal by Write off
In some cases, the fixed asset may become obsolete and will, therefore, be disposed of (discarded or recycled) without receiving any payment in return.
A fixed asset is written off when it is fully depreciated, becomes obsolete and is of no use, significantly damaged, or by other reasons. Either way, the fixed asset is written off the balance sheet as it is no longer in use by the organization.
Write offs of fixed assets are registered by creating the following documents: Asset Management > Fixed Asset Documents > Fixed Asset Write Offs.
The Fixed Asset Write Off document assigns the Disposed status to the listed fixed assets.
If the asset is written off before it is depreciated down to the Salvage value, the current month depreciation expense is calculated as the Net Book Value - Salvage Value. If the Accumulated Depreciation is greater than the Gross Cost, the difference is recorded as a gain. For more information, refer to Fixed Asset Write Offs.
Viewing the documents related to a fixed asset
To find all the documents related to a particular fixed asset, go to: Asset Management > Master Data > Fixed Assets, locate the fixed asset master record, open it, and click the Fixed Asset Documents link on the top. Then, you can view all the available documents related to this fixed asset. For more information, see Fixed Asset Documents.
Viewing information on the fixed assets in reports
Your organization must show both tangible and intangible assets on your balance sheet, with tangible assets listed first. For details, refer to Financial Statements.
For accounting of fixed assets, you can use the following reports in the Asset Management module:
- Statement of Depreciation: The report lists the fixed assets grouped by department with the details of depreciation. You can filter the data by entity, department, and specific fixed asset.
- Balances of Capital Improvements Costs: The report shows the costs of capital improvements on the specified date listed by fixed asset and expense item. You can filter the data by entity, fixed asset, or expense item.
- Balances of Construction in Progress Costs: The report shows the costs of of fixed asset construction in progress on the specified date listed by fixed asset and expense item. You can filter the data by entity, fixed asset, or expense item.
- Costs of Capital Improvements to Fixed Assets: The report shows how the capital improvement costs changed during the specified period for the fixed assets. Expense items reflect the structure of costs. You can filter the data by entity, fixed asset, or expense item.
- Costs of Fixed Asset Construction in Progress: The report shows how these costs changed during the specified period for the fixed assets under construction. Expense items reflect the structure of costs. You can filter the data by entity, fixed asset, or expense item.
For more information on details, refer to Asset Management: Reports.